Snom PA1: Manual Configuration
Written by Marissa Orsini
Updated at March 14th, 2024
Table of Contents
Scope
The following document will show you how to manually provision a Snom PA1 system
Requirements
- Access to Snom web GUI
- Access to Manager Portal
- An unassigned SIP phone must be available on the user
Configure Snom PA1
- Using any web browser navigate to the IP address of the phone.
- Under the Setup tab on the left, click Identity 1.
- In the Login section, fill in SIP Credentials:
- Identity Active: ON
- Display Name: Username from the phone settings
- Account: Username from the phone settings.
- Password: Password from the phone settings.
- Registrar: Domain/Proxy from the phone settings
- Outbound Proxy: Outbound Proxy from the phone settings
- Authentication Username: Username from the phone settings
- Press Apply
- A notification will appear indicating that there are unsaved changes. Click Save.
- Go to the SIP section on the top row.
- Fill in settings to match below information.
- Proxy Require: Outbound Proxy from the phone settings
- Auto Answer: on
- Click Apply, then Save.
